IP20 protection degree (installed device)
Menu
Description
The Ekinex® DALI – KNX Gateway allows the control of the devices present in a DALI network from a KNX TP network. The device has an integrated KNX bus communication module and integrates the power supply stage for the DALI bus
DALI functions
- Control of up to 64 DALI devices in up to 16 groups
- Up to 16 light Scenes
- Broadcast function
- Individual, group or central addressing
- Suitable for operation in emergency lighting systems
- Readout of DALI device status via KNX (e.g. brightness or device error)
Configuration
- Application program for ETS v.5 for the configuration of the KNX functions of the device
- PC application program for the configuration of the device and of DALI appliances
Connections
- KNX port with standard connector
- Screw terminals (doubled) for the DALI bus
- Ethernet port (IEEE 802.3), RJ45 connector, category 5E cable (or higher)
Technical data
- Device power supply: 230 Vac
- Power supply output for the DALI bus: 12 VDC 250mA
Delivery
The delivery includes the device and terminal blocks to connect to the KNX bus.
Other information
DALI® (Digital Addressable Lighting Interface) is a worldwide standard protocol for lighting control interfacing systems, whose data exchange protocol is compliant with IEC 62386. DALI is a trademark of ZVEI (Zentralverband Elektrotechnik- und Elektronikindustrie e.V.).
DALI2 version available with firmware update 3.0.0
Functions / Features
Connection to the KNX bus line with standard KNX terminal block
Plastic casing
Installation on 35 mm rail (according to EN 60715)
4 modular units (1 MU = 18 mm)
Functions / Features
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require:
- ETS v.5.6.x or later versions. ETS application program: APEKBG1TP##.knxprod (## = release).
- CGEKBG1TP application program, available for download on the website www.ekinex.com.